Condensing steam boiler - Euromonitor 6

Condensing steam boiler - Euromonitor 6

  • Rated thermal power: 1-10t/h
  • Rated thermal efficiency: 100-103%
  • Pressure: ≤1.6MPa
  • Available fuel: natural gas, etc.
Get a quote

Euromonitor 6 series steam boilers can provide production steam for food processing, printing and dyeing, pharmaceutical, and other industrial enterprises, provide disinfection steam for medical institutions, provide steam for heating of other enterprises, institutions, and hotels, and can also provide steam through heat exchanger heating domestic hot water.

Get a quote


  • Stable and low nitrogen emissions

    Using full premixed combustion technology, the gas is evenly mixed with sufficient air before combustion, the combustion speed is fast, and local high-temperature areas are avoided in the furnace, thereby reducing the formation of NOx. Boiler nitrogen emission is stable, and NOx emission can be lower than 30mg/m³ in the entire load range.

  • Small size, less land occupation

    The furnace is smaller, and the heating surface of the boiler is arranged compactly. The furnace body adopts feather tubes so there is sufficient heat exchange area in a small volume to meet the heat exchange efficiency. The economizer and condenser are integrated with the rear smoke box to reduce the volume of the boiler further. Compared with ordinary WNS condensing steam boilers, the volume can be reduced by about 50%.

  • Precise water supply

    The configured water level alarm can capture the liquid level in the boiler, and convert the liquid level signal into a control signal and transmit it to the control cabinet; the control cabinet is equipped with a frequency converter, which transmits the control signal of the water level alarm to the frequency converter to adjust the pump motor Speed, realize automatic water supply adjustment, make boiler operation more stable, improve boiler operating efficiency.

  • Strong corrosion resistance

    The heat exchange tube of the Euromonitor-θ6 series boiler condenser adopts a steel-aluminum composite finned tube, which has strong corrosion resistance and long service life. The heat transfer element of the fin tube inside the furnace body, the fin part adopts the aluminum-silicon alloy heat transfer element with high thermal conductivity, which greatly prolongs the service life of the pressure element.


Ultraten fin tube enhanced heat transfer technology

The flue tubes of Euromonitor-θ6 series boilers use feather tubes to enhance heat transfer. Compared with the traditional threaded smoke tube, the fin tube has a larger heat transfer area, which makes the boiler exchange more heat in a smaller volume.

Integrated structure design

Euromonitor 6 series boilers design the furnace body, economizer, and condenser as an integrated structure, canceling the installation interface between various components, simplifying the boiler installation work, and reducing the installation cycle and cost.

NC cutting

Cut edge

Intelligent welding

Drilling and reaming

Condensing steam boiler - Euromonitor 6

Types Evaporation Steam pressure Steam temperature Feed water temperature Thermal efficiency Fuel Natural gas consumption Power requirement Electric power Length * Width * Height Weight Chimney
Unit t/h MPa % Nm3/h V/Hz KW mm t mm
θ6-1000 1 1 184 150℃(80%) 20℃(20%) >95 Gas 68.85 380/50 6.5 3237 * 1927 * 2622 1.02 4.4
θ6-2000 2 1.25 194 137.6 9.7 3455 * 2016 * 2963 1.7 6.1
θ6-4000 4 278.2 16 4170 * 2435 * 3250 3.3 11.4
θ6-6000 6 414.69 17.5 4910 * 2435 * 3545 4.98 15.4
θ6-8000 8 553.7 31 6805 * 2570 * 3680 6.86 20.86
θ6-10000 10 692.12 34 7155 * 2820 * 3970 7.94 23.6