Gas-fired hot water boilers have the advantages of energy saving, environmental protection and safety. They can provide different hot waters of different temperatures according to different needs, which are favored by people.

FANGKUAI Boiler has a variety of hot water boiler types, and has suitable products for different environments and different needs.

1, SZS model water pipe gas hot water boiler
       One of the main advantages of this type of boiler is the ability to customize large tonnage capacity based on the real needs of the user. For some large central heating areas, small-tonnage hot water boilers may not be able to meet the heating needs of users, and the SZS-type gas-fired hot water boilers produced by FANGKUAI Boiler can solve this problem. Some time ago, we cooperated with Gu'an Huaxia Happiness Real Estate Development Co., Ltd. to provide a steam steam water boiler with 80 steam tons and a 40 steam tons.

2, CWNS model atmospheric gas hot water boiler
       This type of gas hot water boiler is a hot water boiler that is currently used more. When the boiler is being produced, the air hole is provided at the top of the boiler. When the boiler is running, the air pressure is always balanced with the atmospheric pressure, and there is no danger of explosion due to the change of the air pressure. At the same time, the boiler is highly automated, and the boiler is added to the fully automatic intelligent PLC control system designed and developed by the boiler. The operation status of the boiler can be grasped in real time through the operation interface, and the boiler operation and stop can be operated through the guiding step, and no one is required to guard at all times. Save time and effort, safety and peace of mind.

3, WNS model pressure gas hot water boiler
       This type of boiler can withstand pressures beyond the normal pressure range. It can provide both low-temperature water and high-temperature water. Due to the micro-positive pressure inside the boiler, the hot water temperature can be heated according to the higher the boiling point. Exceeding 100 °C, it meets some manufacturers with high temperature requirements. At the same time, the overall volume of the boiler is small, usually in the quick-load mode. The bottom of the whole boiler is made of extremely rigid material, which is more convenient in installation and transportation, and has low requirements on the use space. It is suitable for use in various environments.

4, Full premixed complete condensing hot water boiler (H6)
       This type of boiler incorporates advanced full premixed combustion technology. The fuel and air are fully adjusted before entering the combustion chamber. The fuel is burned more fully, and the emission of harmful substances such as nitrogen oxides is greatly reduced. Areas with high environmental requirements. At the same time, the boiler adopts integrated design, which can reduce the floor space of traditional condensing boiler by 20-40%, which not only saves the investment cost of the boiler house infrastructure, but also is suitable for some areas where the boiler room is arranged in a small area.

5, commercial condensing volumetric gas water heater (V6)
       This type of boiler does not need to use a condenser, condensation can be realized inside the furnace body, the exhaust gas temperature can be reduced to below 50 °C, and the thermal efficiency can be increased by 10% or more to 104% compared with the ordinary condensing boiler. Enterprises save a lot of fuel input costs. The use of food grade enamel coating in the furnace can meet the standards of drinking water hygiene and is safer and more reliable.

6, Ultra-low emission vacuum gas hot water boiler (T6)
       The interior of this type of boiler is always kept in a vacuum state, the boiler is completely enclosed, and the interior is filled with heat medium water, and the flowing water in the tube is heated by heat exchange of heat medium water. Because the atmospheric pressure inside the boiler always has external pressure, there is no danger of explosion. The use is very safe. The heat medium water is treated with deoxidation and softening before being injected into the boiler. It belongs to high-purity water and does not increase or decrease during use. The inside will not cause scaling and prolong the service life of the whole boiler.