For users who need to use a vacuum hot water boiler, the selection of the boiler is a very critical step, which is related to the use and maintenance of the boiler in the later period. If you buy inappropriate boiler equipment, you will not only need to purchase a second time. This leads to increased input costs and delays the project construction period. So, what issues should be paid attention to when selecting a vacuum hot water boiler? Let Zhengzhou Fangkuai Boiler Factory tell you the answer.
1. Fuel selection for vacuum hot water boiler:
Fuels such as natural gas and liquefied petroleum gas are common fuels used in vacuum hot water boilers. Zhengzhou Fangkuai Boiler Factory recommends that users give priority to natural gas and regenerated oil, which can be used for both petroleum and natural gas (special order).
2. Load selection for vacuum hot water boiler:
This requires a certain understanding of the application field of vacuum hot water boilers, because the heating load selection of any building cannot be budgeted. This data has a great relationship with building insulation and indoor use, but it has a small relationship with the building area. relationship.
3. For the pressure selection of the vacuum hot water boiler:
If you want the vacuum hot water boiler to output warm water and sanitary hot water, the pressure of the boiler is 0.8 MPa, and the pressure of the parts is 0.81~1.2 MPa, and the parts are recommended to use high-pressure devices. If the pressure is 1.21 ~ 1.6 MPa, the fragmented and comprehensive element should be based on economic and technical analysis to use the ultra-high pressure unit type, or stop the secondary heat exchange. If the pressure is above 1.6MPa, it is recommended to design two heat exchangers for the vacuum hot water boiler.
4. For the location selection of the vacuum hot water boiler:
The unit of the vacuum hot water boiler runs smoothly, with almost no vibration and low music. The location of the machine room is very convenient. The basement, air, floor, and roof can be used as a machine room. If it is used in a high-rise building, in order to reduce the unit pressure, the boiler room should be set in the middle or the top of the floor.


Recently, Zhengzhou Fangkuai Boiler Sales Co., Ltd. traveled to Dhaka, the capital of Bangladesh, to attend the Bangladesh International Textile, Knitwear & Garment Industry Exhibition (BTKG 2026). It showcased industrial thermal equipment and system solutions adapted to the whole process of textile printing and dyeing, actively expanding the South Asian market.
Bangladesh is an important global producer and exporter of textiles and garments. As a pillar local industry, the textile sector has long-term and strong demand for high-efficiency, stable and energy-saving industrial boilers and thermal equipment, with broad market potential. This exhibition participation is an important measure for Zhengzhou Fangkuai Boiler Sales Co., Ltd. to advance its internationalization strategy and further explore overseas markets.

Relying on its technological accumulation and manufacturing advantages in the field of thermal energy equipment, the company provides targeted thermal energy solutions for local textile, printing and dyeing, garment manufacturing and other industries, helping enterprises improve production efficiency and reduce operating costs. In the future, Zhengzhou Fangkuai Boiler Sales Co., Ltd. will continue to focus on overseas market demands, continuously optimize its product and service system, facilitate the high-quality development of the global textile industry with professional and reliable products, and steadily enhance the brand’s competitiveness and influence in overseas markets.

Trust stems from quality
At the beginning of the new year, Fangkuai Boiler and a leading domestic new energy company have reached another important cooperation, successfully signing an order for a total of 500 steam tons.




