Enabling the operation of energy saving and emission reduction of industrial boilers can save a large amount of investment costs for enterprise units, and it can also save the tedious inspection of environmental protection departments.

For industrial boilers, whether they can achieve energy conservation and emission reduction depends on these measures. Zhengzhou Fangkuai Boiler Company will come to explain one by one for you.

1. Reconstruction of fuel supply device
       For oil-fired gas boilers, it is necessary to effectively control the ratio of fuel and air to achieve sufficient combustion. There should be neither too much nor too little fuel.

2.Transformation of combustion system
       The traditional industrial boiler combustion method is diffusion combustion. Such a combustion method is likely to cause uneven combustion temperature inside the boiler furnace, which may easily cause insufficient combustion of fuel, resulting in waste of fuel energy. Zhengzhou Fangkuai Boiler Co., Ltd. changed the combustion system of the industrial boiler to full premixed combustion. This type of combustion uses fuel and air to be mixed in advance, and then close to the combustion device, which can ensure that the temperature in the furnace is uniform throughout and avoid fuel combustion. Non-uniformity occurs.

3. Rebuild the overall structure of the boiler
       Many industrial boilers do not adopt a reasonable design structure when they are manufactured, which will also lead to a reduction in the thermal efficiency of the boiler and ultimately fail to achieve the purpose of energy saving.

4. Reconstruction of boiler auxiliary machine
       The frequency conversion combustion technology can be used to achieve dynamic and intelligent combustion of the boiler, which not only saves the trouble of the boiler worker every time adding fuel, but also makes the boiler and fuel delivery more compatible.

5. The automatic control system is adopted to adjust the output heat of the boiler in real time to achieve the purpose of energy saving.

6.Recovery condensate from boiler operation
       The industrial boiler can increase the operating efficiency by more than 10% after adding condensing technology, which is very energy efficient. However, such a boiler will also generate a lot of condensed water after operation. If the user does not use this part of condensed water, it will also cause energy waste. The temperature of the condensed water is generally around 100 ° C, which is very low compared to the boiler temperature, but there is also a lot of heat. You can recover this part of the condensed water and participate in the boiler for reuse.

7.Boiler replacement, replacement of old boilers with new boilers
       If the operation efficiency of the original boiler is very low, or the pollutants emitted are seriously exceeded, and the service life is long, we do not recommend that you continue to use or rebuild the original boiler. After all, the cost of such a boiler reconstruction It is also very high, and it is better to directly purchase a new fuel-gas industrial boiler that has high energy efficiency and low nitrogen emissions.