The electric steam boiler is a big star product of Fangkuai Boiler manufacturer. Once it was introduced to the market, it got an extremely warm response. And we have set up more than 200 after-sales service outlets in many places across the country to ensure that it can better serve customers aftersale service provided. So, what are the advantages of electric steam boilers produced by Fangkuai boiler manufacturers?

First, the security is extremely high
       The boiler has various safety protection mechanisms such as leakage protection, water shortage protection, grounding protection, overpressure protection, overcurrent protection, power supply protection, etc. to ensure that the boiler can operate safely and stably.
       1. Leakage protection: When leakage occurs in the boiler, the power is cut off in time through the leakage circuit breaker to ensure personal safety.
       2. Water shortage protection: When the boiler is short of water, cut off the control circuit of the heating tube in time to prevent the dry burning damage of the heating tube. At the same time, the controller issues a water shortage alarm indication.
       3. Grounding protection: When the boiler shell is charged, the leakage current is conducted to the ground through the grounding wire to ensure personal safety. Generally, the protective ground wire should be well-connected to the ground. Angle irons and steel pipes buried in the ground are usually used as grounding bodies. The grounding resistance must not be greater than 4 ohms.
       4. Steam overpressure protection: When the boiler steam pressure exceeds the set upper limit pressure, the safety valve is activated to release the steam and reduce the pressure.
       5. Overcurrent protection: When the boiler is overloaded (the voltage is too high), the leakage circuit breaker is automatically opened.
       6. Power supply protection: Reliable power-off protection is performed after detection of over-voltage, under-voltage, and break fault states by means of advanced electronic circuits.

It is very convenient to operate
       1. After the power is introduced into the electric control box, the boiler will enter (or leave) the fully automatic operation state with one-click operation.
       2. The amount of water in the boiler is reduced, and the control system automatically replenishes water from the water tank to the boiler through the make-up pump.

Third, the boiler design structure is more reasonable
       In order to be able to use electric energy more reasonably and efficiently, Fangkuai Boiler manufacturers have divided the heating power into several sections, and the controller automatically turns on (cuts off) the cycle. After the user determines the heating power according to the actual needs, he only needs to close the corresponding leakage circuit breaker ( Or press the corresponding switch). The segmented cycle switching of the heating pipe reduces the impact of the boiler on the power grid during operation.

Fourth, the boiler runs more reliably
       1. The body of the boiler is backed by argon arc welding, and the cover surface is welded by hand, which is strictly inspected by X-ray inspection.
       2. The electric steam boiler uses steel and is selected in strict accordance with national manufacturing standards. 3. The accessories used in electric steam boilers are selected from high-quality products at home and abroad and tested by the test furnace to ensure the long-term normal operation of the boiler.