Users of gas-fired boilers should pay attention to the fact that boiler blowdown is essential

Users of gas-fired boilers should pay attention to the fact that boiler blowdown is essential

For the gas boiler, sewage is a very important operation step, the natural gas boiler drainage is an important link to ensure that the use of continuous sewage discharge discharge of some salt dissolved in water, in order to maintain the boiler water salinity, alkalinity. Emissions are continuously expelled from the evaporation surface, which has the highest salt concentration in the pot water, also known as surface drainage.

Gas boiler sewage is also certain requirements and operation sequence, specific let Zhengzhou fangkuai boiler factory technical engineers to tell you the answer.

1. When sewage is discharged, it must be of high water level and low load (small external load). Steam pressure ≤kg/c; After the water level pump is started, replenish the furnace water to the high water level, and put the pump rotation button in the automatic position.

2. Open the quick discharge valve first, then open the slow discharge valve (slowly) to discharge; Switch between quick discharge valves several times (oscillate from bottom of furnace, discharge with water).

3. The pump will start (light) automatically in the sewage process and stop. First, close the drainage valve. When the quick drain valve is closed, hands must not be removed from the lever. Sewage may be repeated. When only two fixed drain valves are installed and no quick drain valves are available, open the right Angle valve first and then the fixed valve. When closed, note that there is no residual pressure between the two drain valves. Two methods of sewage. But the same furnace must be consistent, not one method today, tomorrow, one method, in order to protect a drainage valve in good condition, ensure safety.

company news