What are the matters to be aware of when installing a gas boiler?

What are the matters to be aware of when installing a gas boiler?

Many users face the problem of installing boilers after purchasing gas boiler products that suit their needs. The technicians of FANGKUAI Boiler have summarized the following precautions for the installation of gas boilers based on years of experience in installing boilers on the customer site.

First, the preparation work before installation
       1. Determine the installation location of the boiler. The unit that installs the boiler must hold the boiler installation certificate issued by the higher authorities in accordance with the installation requirements.
       2. To go through the registration procedures, according to the “Steam Boiler Safety Supervision Regulations”, the units that use the boilers need to go through the registration procedures for each boiler. The boiler user needs to have a person responsible for the work, and is responsible for communicating with the local pot inspection station and docking all installation procedures.
       3. Inspect the boiler and accessories, carry out comprehensive inspection and acceptance of the boiler body, combustion equipment, auxiliary machine parts, etc., and make a record. If it is found that the parts that do not meet the standard are promptly reported to the boiler manufacturer.

Second, the installation work
       1. Boiler body, auxiliary machine, accessory packing box, instrument packing box, etc. need to be hoisted according to the specified position, and the position cannot be changed at will.
       2. There should be enough space around the installation location to facilitate simple maintenance work at the later stage. The boiler door and each inspection hole must be opened.
       3, in the boiler room, you need to leave the air inlet, and also equipped with filters and other equipment, and timely cleaning to prevent blockage.
       4. Do not place flammable and flammable materials, corrosive gases and volatile substances in the boiler room.

Third, the inspection work after installation
       1. After the boiler is installed on the ground, it is necessary to carry out comprehensive inspection and maintenance work to ensure that the boiler will not leak when it is put into operation later.
      

As a square-speed boiler focused on clean fuel boilers for 20 years, FANGKUAI Boiler has considerable industry experience in gas boiler installation and has a very professional user field installation engineer to provide you with services that meet your needs.

company news