How to maintain electric boilers in winter?

How to maintain electric boilers in winter?

Good maintenance can improve the efficiency of heat exchange in electric boilers and reduce electricity consumption. Through experimental comparison, the electric boilers that have been cleaned and maintained under the same conditions have a heating rate of about 25% faster than that of electric boilers that have not been cleaned and maintained. That is to say, the electric boiler can be cleaned after the original foundation. Save about 25% of the power resources.

At the same time, it can extend the service life of electric boilers. Descaling by internal cleaning can effectively reduce the load on the main components such as pumps and heat exchangers, thus making the boiler run more smoothly and prolonging its service life. If the boiler is cleaned and maintained once every two years, the service life of the equipment can be extended for 3-5 years.

Electric boiler maintenance method
       First of all, we must ensure that the use environment of electric boilers should be in a dry, non-moisture environment. If the humidity is too large, it will easily lead to the occurrence of electricity in the electric boiler, causing electrical disasters.

First, before the maintenance of the electric boiler, we must first cut off the power supply, so as to ensure the safety of subsequent operations.

Second, the electric boiler is mainly composed of the body, the electric control box, the control system and various power supply cables. The maintenance and maintenance of these components should be controlled once every two months. For electric boiler burners, it is necessary to remove some foreign matter such as dust every two months during use; Wipe the test once a month; in addition, the filter inside the oil pump should be checked regularly. But be careful: do not damage the sealing pad to avoid damage to the oil pump.

Thitd, during the use of the electric boiler, the safety valve should be moved once a day to prevent rust from losing its original function.

Forth, after all inspections are completed, all tools and materials need to be placed, placed in the designated location, and then safely recorded for later enquiry.

company news