With softened water treatment, industrial boilers can run for at least 5 more years

With softened water treatment, industrial boilers can run for at least 5 more years

Softened water treatment equipment is very useful in industrial boilers. The boiler water is softened in advance and then flows into the boiler, which can effectively reduce the probability of boiler fouling and maintain a longer service life of the boiler.

Different types of water processors use different methods, but they have a common feature, which is to soften hard water; there are many softening methods, but the most common method is ion exchange. The characteristics of ion exchanger use are: The resin is regenerated.

Everyone should pay attention to the following issues when using ion-exchange industrial boiler water softener:
       A. When the hardness of the effluent water exceeds the standard, it must be stopped and regenerated;
       B. The method of cationic resin regeneration is to soak the resin in salt water for about two hours, let the salt water dry, and then backflush with clean water to continue using it;
       C. The method of judging whether the exchanger resin is invalid (when must be regenerated) is very simple:
       Wash your hands with a piece of soap in raw water (water before treatment), and use the same method to wash your hands in the finished water after treatment. Compare the feel of the two washes. If the water is soft, the hands are very slippery, and the soap always washes. No, the processor is normal at this time and does not need to be regenerated. On the contrary, if the two feels are the same, it means that the processor has failed and can be regenerated at this time.
       D. Other types of processors can also use this method to adjust the amount of salt or other regeneration parameters.

company news